Striped Nail Art: Red & White Gel Polish Nail Art Tutorial

Sometimes the most useful designs are the simple ones. In this tutorial we recreate a red and white look spotted online: a simple base, a bold block of Sour Cherry running through the centre of the nail, and fine Snow White lines painted over the top. It's a fairly simple piece of striped nail art, and it's a brilliant staple to keep in the back of your mind for mix and match sets.

The whole look uses just two gel polish colours plus a base and Top Coat, so there's very little to gather before you start. What you do need is a steady hand and a bit of patience for the line work, and the video is refreshingly honest about that. The first attempt at the white lines doesn't go to plan and has to be started again, which is a useful reminder that even simple striped nail art takes practice.

Why You'll Love This Striped Nail Art

This design is what the video calls a really good filler nail. If a client wants five different designs on one hand, one for each nail, you need a few quick ideas that sit happily next to ombré, chrome or a swirl nail. Striped nail art does exactly that. It has enough contrast to hold its own, but it doesn't fight with the nails either side of it.

It's also very forgiving. The red section can be as thick or as thin as you want and it doesn't have to be exact, so you can adjust it to suit the nail in front of you. The colours are easy to swap as well. The tutorial uses a cherry red with crisp white, but the same idea is suggested in summer colours, with glitter, or in nudes and pinks.

Products Used in This Video

How to Create Striped Nail Art in Red and White

1. Mix the base colour

Start by mixing Pinched together with base coat. This blend has become a favourite base colour in the video, and it's mentioned more than once that the same mix makes a lovely French base too. Make sure the two are properly mixed before you pick up your brush.

2. Apply the first coat of base

Apply the first layer of the mix over the nail. It goes on very easily. Once the nail is covered, cure for 60 seconds.

3. Apply a second coat

Go in with a second coat of the Pinched and base coat mix. You won't see a great deal of it in the finished design because you'll be painting over much of it, but you still need something underneath the colour.

4. Map out the red section

The design runs through the centre of the nail. Using Sour Cherry, map out a rough line first. Then twist the brush around and, ever so slightly, drag the colour out towards the outer edge of the nail. This gives you the outline of the shape before you commit to filling it in.

5. Fill in with Sour Cherry

Fill in the mapped section with Sour Cherry. On camera the shade looks quite red, but off camera it's described as more of a cherry colour with a pinky tone. As you fill in, check that the top section of the nail sits exactly where you want it. The block can be as thick or thin as you like, so don't worry about making it exact.

6. Even out the edges and cure

Take a moment to even out the lines along the edges of the red section. When you're happy, cure for 60 seconds.

7. Add a second coat of Sour Cherry

Go back over the red section with a second coat of Sour Cherry so the pattern is solid and ready for the detail on top.

8. Draw the white lines on the first side

Now that the pattern is in place, go in with Snow White and draw in the lines, starting in the centre. This is the fiddly part of the striped nail art. In the video the first go isn't going well, so it has to be started again. The advice is simple: don't overthink it, just go with it.

9. Flash cure before the second side

Before repeating the lines on the other side, pop the nail in the lamp for around 10 seconds to flash cure. This sets the lines you've already painted, so if something goes wrong on the second side you don't have to redo all of them.

10. Repeat the lines on the other side

Repeat the same Snow White lines on the other side of the nail. The finished effect is described as gradient lines running across the design.

11. Finish with Top Coat

Apply Top Coat over the whole nail and cure. Then take a final look at your finished striped nail art.

Pro Tips

  • Flash cure as you go. Around 10 seconds in the lamp after the first side of lines means a slip on the second side won't cost you all your work.
  • Don't overthink the lines. If the first attempt isn't going well, start again and keep your strokes relaxed rather than hesitant.
  • Map before you fill. Marking a rough line, then twisting and dragging out towards the outer edge, gives you a shape to follow before you add the colour.
  • Remember the base mix. Pinched mixed with base coat is used here under the design, and it's recommended as a nice French base as well.

Who Is This Design For?

This look is ideal for nail techs who offer mix and match sets and need reliable designs to fill them out. When you're struggling for ideas to complete a set of five different nails, striped nail art is quick to explain to a client and uses colours you're likely to have on your wall already.

It's also a good practice piece if you're working on your line work. The steps themselves are straightforward: a base, a block of colour and a series of lines. The challenge is in keeping those lines neat, and the video is open about the fact that the lines could be better. That makes it a realistic, encouraging tutorial to follow if you're still building confidence with a detail brush.

Ways to Make It Your Own

The technique stays the same whichever colours you choose, so it's easy to adapt:

  • Swap the red for summer colours, as suggested in the video.
  • Try the design with glitter in place of the solid colour block.
  • Use nudes or pinks for a softer take on striped nail art.
  • Make the centre section thicker or thinner to change how bold the nail looks.
  • Use it as one nail in a mix and match set alongside ombré, chrome or a swirl nail.

Aftercare: Looking After Your Striped Nail Art

A little care helps any gel manicure last. Apply cuticle oil regularly to keep the skin around your nails hydrated, and wear gloves for washing up and cleaning to protect the finish. Try not to use your nails as tools, as this puts pressure on the free edge.

Avoid picking or peeling at the gel, because this can damage the natural nail underneath. When it's time for a new set, have the gel removed properly rather than pulling it off.

Frequently Asked Questions

What colours are used in this design?

The tutorial uses Sour Cherry for the red section and Snow White for the lines, over a base of Pinched mixed with base coat. Top Coat is used to finish.

How long do you cure each layer?

The first coat of base and the first coat of Sour Cherry are each cured for 60 seconds. The first side of white lines is flash cured for around 10 seconds before the second side is painted.

Why flash cure the white lines?

Flash curing sets the lines on the first side. If you make a mistake on the other side, you can correct it without having to redo every line.

Does the red section have to be a set width?

No. It can be as thick or thin as you want and it doesn't have to be exact.

Can I do this design in other colours?

Yes. The video suggests summer colours, glitter, nudes and pinks as alternatives to red and white.

Try This Striped Nail Art for Your Next Set

With a simple base, a block of Sour Cherry and fine Snow White lines, this is a simple design that earns its place in any mix and match set. Watch the full video above to see the mapping and line work in action, then have a go at your own striped nail art.

Articoli Correlati